PHYSIO-CONTROL LIFEPAK 9A

Description

Physio Control Lifepak 9 Features
The
Physio-Control Lifepak 9
is a microprocessor-based defibrillator. This unit has a built-in recorder and sealed lead acid battery back-up. Lifepak 9A meets current ACLS standards and allows for 17 energy selections, HR alarms, 5-lead monitoring, recorder and CODE SUMMARY critical event record. The
Lifepak 9
is defibrillator/monitor, cardioscope, and non-invasive pacemaker. It provides 17 energy selections, heart rate alarms, three-lead ECG monitoring, recorder and Code Summary™ critical event recorder. The microprocessor-based Lifepak 9 includes an internal battery supply and is available with optional pediatric paddles, internal paddles, pacing cable and pads, and ECG patient cable and leads. Isolated ECG via Quick-Look defibrillator paddles, Fast-Patch disposable defibrillation/ECG electrodes or three-lead patient cable.
Defibrillator with ECG and recorder
The Physio-Control LIFEPAK 9 defibrillator/monitor was designed to meet the needs of clinical, biomedical engineering, and purchasing professionals throughout the world
ECG Lead Selections: STD, Paddles, I, II, III
Input: Isolated ECG via Quick-Look defibrillator paddles, Fast-Patch disposable defibrillation/ECG electrodes or three-lead patient cable
Patient Cable Length: 13-foot total length (10-foot w/ three-foot leads)
Common Mode Rejection: 100dB min. with respect to chassis ground and 65dB min. with respect isolated ground, when measured at 60Hz (common mode range for patient cable input is 10 Volts peak w/ respect to isolated ground)
Monitor Display Size: 4” (w) x 3” (h)
Sweep Speed: 25 mm/sec
Description
Used, powers on, NEVER USED, SOLD AS IS
Defibrillator pads included
Optional adult or pediatric paddles available
The Physio-Control LifePak 9 Defibrillator and monitor are designed to meet the needs of clinical, purchasing and biomedical engineering professionals throughout the world
Innovative features include high and low energy select display
Annotating recorder that prints out time, date, leads, and gain
Code summary critical event record, which recaps critical events from the moment of “power on”
ECG Size: Adjusts amplitude of ECG trace on monitor and strip chart recorder
Heart Rate Meter: Three-digit readout displays rates from 20 to 300 bpm
Heart Rate Alarm: User selectable alarm limits with three high/low settings
Technical
Charge Time: Charge to 360J in less than 10 s with a fully-charged battery
Defibrillator Energy: ±15% at 50 deg
Accuracy: ±30% over the range of 25 to 100
Defibrillator Waveform: 5ms monophasic pulse
Sweep Speed: 25 mm/sec
ECG Leads: 1.0 to 40Hz (-3dB)
Paddles: 2.2 to 20 Hz (-3dB)
Power Consumption: 160 Watts maximum while monitoring with recorder ON and defib charging
Battery Detail
Battery Type: Sealed lead-acid, 16 Vdc nominal, 3Ahr
Fully-Charged Battery Capacity: Number of 360J discharges: Typical: 75 | Minimum: 40 Minutes of monitoring: Typical: 90 | Minimum: 70
Battery Charge Time: 24 hours to full capacity
Defibrillator
Defibrillator Waveform: 5 millisecond monophasic pulse (Edmark)
Energy Select:
External Paddles: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 20, 30, 50, 100, 200, 300, 360 Joules
Internal Paddles: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 20, 30, 50 Joules
Charge Controls: Independent momentary push button controls on front panel and APEX paddle.
Paddle Cord Length:3m (10 ft)
Charge Indicators: Flashing lamps on paddle and front panel pushbutton along with increasing stored energy display indicate charge in progress. Upon full charge, energy available is displayed on monitor and charge completed tone sounds.
Charge Time: Charge to 360 Joules in less than 10 seconds with a fully charged battery.
SYNC: Synchronizes defibrillator pulse to patientgenerated QRS complex.
SYNC Indicator: Inverted triangle marker on displayed ECG waveform identifies synchronizer trigger point with respect to patient’s QRS complex.